Caricabatterie Bizmodel GT Power B606 LiPo modellismo

GT Power B606 LiPo Battery Balancer/Charger 6 A 50 W con bilanciatore a 6 celle.
The B606 is a small but versatile balance charger allowing you to charge LiPo, LiFe, NiMh, NiCd and PB (lead acid) batteries at a 6 A charge rate.


– Input Voltage: 10-18 V
– Cicrult Power: Max 50 W charger, Max 5 W discharger
– Charge Amp: 0.1-6 A
– Discharge Amp: 1 A
– Battery Type: LiPo/LiFe 1-6S, NiMh/NiCd 1-15S, Pb 2-20 V

Features:
– Built in 2 to 6 cell JST-XH balance ports
– Multi-chemistry support
– Fully balance charging for LiPo and LiFe batteries
– “Fast” charge program for quicker charging times
– “Storage” program for charging/discharging your LiPos for safe storage
– Cycle charge / dischare up to 5 times

Specifications:
– Operating voltage range: 10.0-18.0 V
– Circuit power: Max 50 W for charging, Max 5 W for discharging
– Charge current range: 0.1-5.0 A
– Discharge current range: 0.1-1.0 A
– Current drain for balancing Li-po: 300 mAh/cell
– NiCd/NiMh battery cell count: 1-10 cells
– Lithium battery cell count: 1-6 Series
– Pb battery voltage: 2 to 20 V
– Weight: 400 gr
– Dimension: 65x130x45 mm

Whats in the box:
– B606 Charger
– Input cable with crocdile clips
Output cables to:
– Deans / T-plug male
– Deans / T-plug female
– JST two-pin
– Universal receiver pack socket
– Crocodile clips
– Glow plug

Cerca e compara tutti i prodotti Bizmodel con Cercamodellismo.it

[Fonte: Modellismo.it]

Related Posts