Lotus 102B F104W in kit di montaggio.
Codice: 84287
Vai all’offerta su eBay.it
Prezzo di listino: 229€
Asta pazza eBay a partire da 1€!!!
Lotus 102B F104W Chassis 2WD 1:10 Kit.
Splendida riproduzione in scala 1:10 della Lotus 102B. 2WD, gomme in spugna. Kit senza elettronica, solo con il motore. Impianto RC venduto separatamente.
Team Lotus entered the 1991 F1 season with the Type 102B, a modified version of the Type 102 used in the previous season. It was powered by a 3.5-liter V8 Judd engine mounted onto a carbon-composite monocoque chassis and its aerodynamic body was adorned with a green and white livery. Tamiya was one of the team’s sponsors during this season and the car featured Tamiya logos in prominent locations. Finnish driver Mika Hakkinen, who later became a world champion, famously drove this car as a rookie and an actual example is on display at Tamiya’s headquarters in Shizuoka. The original R/C assembly kit was introduced on the F101 chassis. The re-release version is available on the proven and modern F104W chassis.
Specifications:
– Scale: 1:10 scale
– Construction type: assembly kit
– Terrain use: on-road
– Drive-train: 2WD
– Drive type: pinion to spur gear
– Drive line: solid axle
– Differential type: ball pressure plate
– Suspension: independent front/solid axle rear
– Steering mechanism: direct servo
– Shock damper: friction damper
– Shock damper material: plastic
– Tire type: foam
– Tire tread: slick
– Body material: Clear Polycarbonate
– ESC: not included
– ESC type: N/A
– LED Light buckets: no
– LED lights: no
– Motor type: 540-brushed type
– Bearings: metal and plastic bushings
– Chassis material: FRP
– Sticker material: vinyl
– Internal gear ratio:
– Adjustable camber: front only
– Adjustable toe angles: front only
– Adjustable ride height: yes
– Adjustable gear ratio: yes
– Adjustable wheelbase: fixed
– Adjustable track width: fixed
– Adjustable shock angle: fixed
– Anti-squat adjustment: fixed
– Droop adjustment: fixed
– Special features: F103 front end
– Requires: 7.2V battery charger
– Requires: radio gear, servo, receiver
– Requires: polycarbonate paint
Caratteristiche tecniche del prodotto:
- Lunghezza: 422 mm
- Larghezza: 200 mm
- Altezza: 100 mm
- Passo: 270 mm
- Carreggiata: 155/170 mm
- Diametro ruote (ant/post): 56/67 mm
- Larghezza ruote (ant/post): 31/50 mm
- Rapporto: 3,71:1
Istruzioni in inglese. Per completare il modello occorrono regolatore, servo, batteria, caricabatterie, radiocomando, ricevente, eventuali vernici, attrezzi e colle. Questo prodotto non e’ piu’ presente nel listino del distributore quindi, nonostante sia nuovo, non e’ coperto da garanzia.
Vai all’offerta su eBay.it
[phpbay keywords=”tamiya” num=”6″ siteid=”12″ category=”220″ sortorder=”EndTimeSoonest” sellerid=”il.modellismo” templatename=”columns” columns=”2″]